Cedar Park Custom Cabinets
Bathroom Vanity Cabinets in Cedar Park, TX
Custom bathroom vanity cabinets in Cedar Park, built-to-fit for odd layouts, moisture-resistant finishes, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Cedar Park and nearby communities.
Why does a stock vanity never quite fit the bathroom? Because bathrooms are rarely built to a standard dimension, and a 36-inch box off a shelf doesn't know that. Cedar Park Custom Cabinets builds vanities sized to your actual layout, plumbing included.
Older Cedar Park and Jonestown bathrooms especially run into this. Odd wall offsets, narrow footprints, a vanity that needs to clear a door swing. Custom solves the fit problem a store box can't.
What's included
What's Included With Bathroom Vanity Cabinets
Typically included: Optional: Customer prep:
- Vanity base built to your measured bathroom footprint
- Drawers and doors in your chosen finish
- Sink cutout fitted to your selected sink model
- Countertop coordination
- Soft-close drawer upgrade
- Decorative hardware package
- Confirm sink and faucet selection before fabrication starts
- Note plumbing rough-in location if it's not moving
Want a clearer scope?
Get a Free EstimateBathroom Vanity Cabinets
Build Process
- Space Measurement — We measure the bathroom to determine the appropriate vanity size.
- Style Selection — Clients choose a style and finish that suits the bathroom's design.
- Cabinet Construction — The vanity cabinet is built using moisture-resistant materials.
- Sink Cutout Fitting — Precise cutouts are made to accommodate the selected sink type.
- Finish Application — A protective finish is applied to withstand bathroom humidity.
- Installation — The vanity is installed and secured with proper plumbing alignment.
Questions about this?
Get a Free EstimateMaterials
Materials and Methods for Bathroom Vanity Cabinets
Moisture-Resistant Plywood
A construction material designed to withstand bathroom humidity, holding up far better than particleboard in daily steam exposure.
Vanity Hardware
Handles and knobs selected to match the vanity's design.
Custom Sink Cutouts
Precisely cut openings designed to fit specific sink models.
Soft-Close Drawers
Drawers engineered for quiet, controlled closing.
Water-Resistant Finish
A sealant that protects surfaces from moisture damage.
Decorative Panels
Panels added to enhance the vanity's visual detail.
Questions on materials?
Get a Free EstimateCost
What Does a Bathroom Vanity Cabinets Cost in Cedar Park?
Pricing depends mostly on size, wood species, and whether the plumbing needs to move.
| Project type | Typical range | What’s included |
|---|---|---|
| Single-sink vanity | $1,500–$3,500, | standard size box with drawers and finish. |
| Double-sink vanity | $3,000–$6,500, | wider footprint with full drawer bank. |
| Odd-size or niche-fit vanity | $2,500–$5,500, | custom dimensions for tight bathrooms. |
| Premium wood or stain finish upgrade | $500–$1,200 | Add depending on species. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Request a free estimate for a written number specific to your bathroom.
Codes & permits
Permits and Codes for Bathroom Vanity Cabinets
Always verify specifics with the City of Cedar Park or Williamson County before starting.
| Typically needs a permit | Often no permit |
|---|---|
| Relocating the plumbing rough-in for a new vanity position | Replacing a vanity in the same footprint |
| Adding a new electrical outlet or light fixture | Swapping sink style without moving supply lines |
| — | Cabinet and countertop replacement alone |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs. Hiring a Pro for Bathroom Vanity Cabinets
| DIY | Hire a pro |
|---|---|
| Fine for a standard-size stock vanity with no plumbing changes | Needed for odd dimensions where stock sizes leave gaps |
| Home center kits work if your bathroom fits a common footprint | Better for matching finish to existing cabinetry or trim |
| — | Reduces risk of plumbing misalignment during install |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Bathroom Vanity Cabinets
Before 
After
FAQs
Bathroom Vanity Cabinets FAQs
What wood holds up best in a Texas bathroom?
Maple and birch plywood with a moisture-resistant finish hold up well to Central Texas humidity swings without warping at the seams.
What should I expect to pay per linear foot for a vanity?
Most vanities run $300 to $700 per linear foot depending on wood species, drawer count, and finish.
How it works
Our process
Step 1Space Measurement
We measure the bathroom to determine the appropriate vanity size.
Step 2Style Selection
Clients choose a style and finish that suits the bathroom's design.
Step 3Cabinet Construction
The vanity cabinet is built using moisture-resistant materials.
Step 4Sink Cutout Fitting
Precise cutouts are made to accommodate the selected sink type.
Step 5Finish Application
A protective finish is applied to withstand bathroom humidity.
Step 6Installation
The vanity is installed and secured with proper plumbing alignment.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets in Cedar Park, built-to-fit boxes, soft-close hardware, free estimates on every project.
Custom Kitchen Remodels
Cabinet-driven kitchen remodels in Cedar Park, layout changes, demo, and install, free estimates.
Built-In Shelving And Wall Units
Custom built-in shelving and wall units in Cedar Park, fit to your wall and trim, free estimates.
Ask about Bathroom Vanity Cabinets
Tell us about the project and how to reach you.